What are the standards for piston automated production lines in operation?
Published Time:
2021-12-15
Piston production line machinery generally operates in high-temperature, high-pressure, high-speed, and poorly lubricated environments. When a piston contacts high-temperature gas, the temperature instantly reaches above 2500K. Therefore, the piston operates under conditions of high heat resistance and varying heat dissipation, and the temperature is uneven in different areas. What are the standards for piston automated production lines during operation? What standards do we need to adhere to?
The mechanical equipment of piston production lines generally operates in high-temperature, high-pressure, high-speed, and poorly lubricated environments. When a piston contacts high-temperature gas, the temperature instantly reaches above 2500K. Therefore, the piston operates under conditions of poor heat resistance and heat dissipation standards, and the temperature is uneven in various locations. So, Piston automated production line What are the standards in operation? What standards do we need to follow?
1. The selection and installation of the piston automated production line should be determined according to the maintenance specifications of the cylinder. Generally speaking, the baseline value of the increased specification is located at the top of the piston. If you don't know, you should choose which type of piston to see how the specifications on the top of the piston are.
2. Even for pistons of the same series, the structural structure of the piston automated production line piston may differ. Therefore, when purchasing a piston line piston, it is best to match the appropriate piston according to the type of engine. In the opinion of this writer, it is hoped that the same engine can use pistons of the same manufacturing brand, the same group, or the same product number.
What types of pistons are there in piston automated production lines?
1. According to different fuels, they can be divided into gasoline engine pistons, diesel engine pistons, and natural gas pistons.
2. According to Piston automated production line Different raw materials for producing pistons, they are divided into cast iron pistons, steel pistons, and composite pistons, etc.
3. According to the operating conditions of the piston, they can be divided into increasing pistons and non-increasing pistons.
4. According to the different uses of the piston automated production line pistons, they are divided into passenger car pistons, motorcycle pistons, truck pistons, heavy tank pistons, etc.
The same model should be equipped with the same model of piston production line piston, so that the diameter difference and product quality difference will not exceed the original requirements. Otherwise, the engine efficiency will become worse, and common faults such as reduced rationality and driveability will frequently occur during operation. Therefore, when reinstalling pistons, it is preferable to choose a piston production line piston of the same specification according to the type of engine.
The above is a sharing with everyone of Piston automated production line What standards are there in operation. Hope it helps those who read this article!
Recommended News
Quick Navigation
Address: Binhe Road, Gaoyou High-tech Zone, Gaoyou, Jiangsu Province
Tel: 0514-84022599
Mobile: Xia Zhirong 13801456657
Email: zgjsnpjj@126.com
Copyright © 2025 Jiangsu Niupai Group